What’s the difference between titanium vs. ceramic flat? What’s best for your hair type? Today, I’m sharing the answers to these questions and following up with tips to get the most out of your styling!
Ceramic Flat & Curling Irons
Ceramics are less damaging because your hair has no direct contact with the metal plate itself (the contact is with the ceramic).
While shopping for a ceramic curling iron, check if they contain solid ceramic wands instead of ceramic coating. Here’s why:
- Ceramic coatings are much lower quality and less durable than solid ceramic wands.
- Solid ceramic wands are safer and can take years of use.
Ceramic Pros
- In many cases, the ceramic curling irons can produce negative ions that reinforce shininess and reduce frizz.
- Gives long-lasting results
- Is more gentle on the hair
- Less damaging
Ceramic Cons
- Frequently, it can get more expensive.
- You need to be careful while using the tool, don’t let it fall off your hand too much because it’s a fragile product
Titanium Flat & Curling Irons
Titanium tools have their advantages as well. Firstly, it is very lightweight, which won’t tire you too much. It also heats up quickly and can reach higher temperatures, leaving your hair shinier.
Titanium Pros
- Great polished finish
- Lightweight on the hands
- Provide a quicker and more efficient curling
- Durable
- Long-lasting results
Titanium Cons
- Causes more damage to the hair
- Not suitable for daily use
Titanium vs. Ceramic Flat Iron (and Curling Irons)
Titanium flat or curly irons are more potent than ceramic ones. It heats up quicker, getting your hair straighter in less time, and their plates heat the hair from the surface.
Ceramic tools, on the other hand, are the opposite. They take longer to heat, and their plates heat the hair from the inside out, which takes longer.
Titanium heating tools are more suitable for professionals or those with a lot o experience because they are more damaging than ceramic flat or curly irons.
Take a look at the titanium vs. ceramic flat iron comparison table below for more info:
| Which heats the fastest? | titanium flat iron hair straightener, as ceramic flat iron takes longer to heat up |
| Which one offers even heat distribution? | ceramic flat irons (ceramic hair straightener) |
| Which one is less damaging | ceramic flat irons hair straightener |
| Which one is the most resistant and lighter? | titanium flat iron hair straightener |
Ceramic or titanium flat iron: Which one is better?
Titanium flat irons provide straighter hair, perhaps even shinier, in less time than a ceramic flat iron. However, using the ceramic plate is better because it brings excellent results without too much damage.
Best For Fine, straight, wavy, and curly hair?
Fine, straight, and wavy hair are easier and quicker to style, so you don’t need too much heat in this process. To be safe, it’s better to choose a ceramic flat iron and a curling iron with a low temperature.
Best For Curly Hair?
If you have curly hair, look for a ceramic flat iron. You will probably need heat styling tools with higher heating setting options so that you can straighten your hair after one or two strides (in the case of the flat iron)
The same applies to the curling iron. Higher temperatures allow the waves or curls to stay longer and look more defined.
It should not be too hot, though. Some professionals say thick and difficult hair can hold 380 degrees to 450 degrees.
Best For Coily Kinky Hair
Those with coily or kinky hair will probably get more benefits by using titanium hair straighteners, as they are more potent. It will provide long-lasting results, leaving the hair shiner and smoother.
If you are C4 and have already treated your hair with keratin blowout or other chemicals such as relaxers, you could opt for a ceramic flat iron.
Make sure you use a good shampoo, adequate for your hair type, and always use deep conditioners and hair masks every time you blow out your hair or use any type of hot tools.
Titanium vs. Ceramic Flat Iron By Features
1. Heat conduction / even heat distribution
Heat conduction is how the heat is distributed on the styling tool. Some professionals say unruly hair can hold between 380 degrees to 450 degrees Fahrenheit.
But you can find smart curling and flat irons that offer intelligent and even automatic heat distribution.
I’d stick with ceramic flat irons and curling wands, as they are safer and still offer stunning results.
2. Heat Transfer
Titanium straighteners are faster. Heat transfer relates to how long the tool takes to heat up totally. Pick tools that take 30 seconds or less to heat the plate thoroughly, especially if you have thick, unruly, or difficult hair.
3. Durability
Titanium flat irons are more durable than ceramic flat irons. Ceramic is a fragile material, which will require you to take extra care while using it.
So, if you use your hot styling tool every day or often enough, ensure you don’t drop it that often, as it can damage faster.
Another aspect of having in mind is that at the pace of using a ceramic plate styling tool, the chances are that the plate will become weaker with time.
Titanium is a more resistant material that allows you to relax a little more, as it will not break too easily if you drop it.
It is also more heat-resistant so that the plates can be conserved for longer than ceramic ones over time.
4. Ease of Use and practicality
One of the first things you should pay attention to while shopping for a heat styling tool is how light they are.
Especially if you are planning to style your hair fairly often and if you have curly or unruly voluminous hair.
It seems obvious, but many people forget these details while shopping for heating tools.
Final Takes
Today we compared titanium vs. ceramic flat iron and titanium vs. ceramic curly iron. Please feel free to send a message in the comments section below! And remember to follow the makeup on Instagram @themakeup.insta. 😀